Hi Friends, Welcome to M4 Tech. We’re gonna see a technique called Hydro dipping. This technology is currently trending worldwide. Means an art created by spray paint. Not much skill is required. We’re gonna do it in shoes first. Let’s go to the workshop. First we’ve taken a white shoe. We’ve taken a cheap priced shoe that is available in market. Almost costs 250 rupees. Removed the lace from it. Now wherever we want white part, we can mask those alone. So, we’re gonna mask the lower and lace portion. So to mask this, you can use an insulation tape or a masking tape. If insulation tape is not used from a good brand, the gum in it might get stuck in shoes itself. Now I’ve taken a good brand. So we’re covering the parts where white color is needed with the tape. So if we use masking tape, it might take time since we might need to hold it for sticking well with shoes. But with insulation tape, it’s easy. On the sides, we can stick like this. The lower and lace portion is being masked now. The bottom layer is also masked. We don’t require paint over here. Now we can mask the tongue of the shoe. The insulation tape, we had is over. So we’re gonna use the masking tape to mask this portion. So when the masking process is complete, next work is to perfectly cut out the edges. So whatever shape we need, we can just cut it off. After cutting off, we can remove the unwanted portions like this. So, we’ve prepared the shoes. We need a container like this. A container where shoe can sink. We’re gonna fill water inside it. We can pour it. We’re gonna apply the paint. I’ve black and red colors, we can shake it and spray black first. Then the red color. Again black. Red. In this pattern, we can keep on spraying. So we’ll get a design. When spraying remember to spray on continuous intervals. Don’t go to take rest. How good you’re gonna spray, that much good the patterns will be to see. Our pattern is ready. We’re gonna sink our shoe in it. See how I’m going to submerge this. Hold it upside down and this portion should go first. Slowly we can hold on the top and sink it in. See! Slowly… we’re sinking… till it sinks completely. Until the bottom covers, just sink it. We’ve sunk it completely. Now we can remove the paint surrounding the shoe, just like this. We’ve removed the excess paint. Now we can see a good pattern has formed in our shoe. This is the piece which we sank now. We need to dry it for 5 minutes. We’re gonna sink the next shoe, so we can spray once again. As did earlier, we’re giving the same pattern. Black and red. That’s the combination. We can use any colour of our desire. We just used black and red. We can do any colors in this pattern. We’re going to sink this shoe as well. Just as we did earlier, hold upside down and slowly sink it in. Slowly we can sink it in. After completely sinking it, as we did earlier remove the excess paint from the surrounding. We’ve removed the paint. See, here as well we got a nice pattern. We can let it dry for 5 minutes. The shoe is ready. We can remove the masking tapes from the shoe now. So when we remove the masking tape, remove carefully because the paint also shouldn’t come off from shoe. Carefully remove all the tapes from the shoe like this. From one shoe, we have removed the tapes. How’s it? Looks great right? Removing tape from another shoe as well. See if we stick the tapes perfectly and do, we’ll get the designs perfectly. When we remove the tape, it’s coming out perfectly. So we can do it in different color and pattern. After that, we can also add additional colors and dip it in. And this shoe itself can be made with different patterns. So now we can remove the lace portion as well and when we tie the lace, it’s ready. See, our great designed and customized shoe is ready. So next we can see how to hydro dip the bottles. We’ve taken a beer bottle. First we can spray a primary coat. We’ve taken white and coat it. Then only our work will be perfect. First, we can coat it white. We can use primer or white paint. We’re preparing a variety combination. We’re gonna do multi-color this time. We’re testing all colors. So design is ready. We’re gonna dip it in. In centre, we can dip it slowly inside. Design is getting stuck in the bottle. As did earlier, we can remove excess paint. It’s a great design. We’re doing a combination in blue. It’s a good pattern and we’re dipping in. Blue and black is a variety color. It’s good to see. We’ve dipped in and removed excess paint. When we lift it up, we can see an awesome design. Now we’re doing green color. We’ve done green color as well. We’re dipping the bottle in. We need to use the glove or else the paint will stick on hand. For this work, it’s better to use glove for our safety. And also to get the work done perfectly. So green is also dipped in and removing excess paint. We’ve got a great combination of green. We’ve done some awesome combos. The work done in beer bottle can be done in anything. Hope you all liked today’s video. Like or dislike the video. Hydro dipping is the latest trending one in the world. It’s an easy task, without any skill required. You can try any work in your home with this. Bottles or shoes or anything. This technique is useful. So try it as it is the trending one in the world and also started come over here. So do try and enjoy. Like or dislike, comment your feedback. Subscribe the channel to see exciting content like this. We’ll meet with some interesting videos. With cameraman Praveen, it’s me Geo Joseph signing out!